Roto-Spread • Waste Disposal Trucks

Download Literature (pdf)

The New Standard in Spreader Performance

Roto-Spread	532-16 Truck	672-20 Truck	802-19 Truck
Capacity (Heaped)	530 Cubic Feet	670 Cubic Feet	800 Cubic Feet
Load Capacity (Net)	34,000 Lbs.	43,000 Lbs.	50,000 Lbs.
Inside Dimensions	48" High 71.5" Wide 192" Long	48" High 71.5" Wide 240" Long	48" High 90" Wide 228" Long
Minimum Truck Horsepower	300	375	450

Patented Belt and Retention Gate Design—Carries the Material which Requires Less Horsepower and Provides for a Smooth and Even Flow of Material
High Speed Double Flighted Vertical Beater System—Produces a Wide and Even Spread Pattern and Eliminates Large Chunks
Automatic Belt Speed Reduction in Response to Excessive Beater Pressure—Eliminates Stalling of Beater System
Reversible Belt—Allows for Removal of Foreign Objects
Adjustable or Removable Wings—Allow for Changes in Width of Spread Pattern

Beater Assembly is Easily Removed for Stock Piling or Hauling. (Quick Disconnect Kit Recommended)

Bottom, Sides and End Gate Made of High Density Polyethylene. Belt Made of 5⁄16" Thick 350 PSI PVC Material.

Double Flighted Beaters with Optional Knife Kit.

Simple Open Bar Roller for Belt with Standard Bearings.

Solid Steel Frame for Strength Under the High Density Polyethylene Floor and Sides.

Heavy Duty Planetary Gearbox with Extra Heavy Duty Drive Chain for Long Life and Durability.

UHMW Blocks Guide Retention Gate as it Slides.

Double Flighted Beaters with Optional Knife Kit.

Equip Your Truck with the Optional Scale Package to Monitor Application Rate.

Truck Cab Panel Gives Driver Complete Control

Truck Cab Panel Gives the Driver Complete Control of All Spreader Functions.

ROTO–SPREAD Truck Mount Specifications

Roto-Spread	532-16 Truck	672-20 Truck	802-19 Truck
Capacity (Heaped)	530 Cubic Feet	670 Cubic Feet	800 Cubic Feet
Struck Level	385 Cubic Feet	480 Cubic Feet	570 Cubic Feet
Spreader Weight (Empty)	10,800 Lbs.	12,200 Lbs.	14,000 Lbs.
Load Capacity (Net)	34,000 Lbs.	43,000 Lbs.	50,000 Lbs.
Inside Dimensions	48" High 71.5" Wide 192" Long	48" High 71.5" Wide 240" Long	48" High 90" Wide 228" Long
Outside Dimensions	96.5" Fender Width	96.5" Fender Width	102"
Overall Length	274"	322"	315"
Overall Height (Gate Lowered)	137" ( Based on 40" truck frame)	137"( Based on 40" truck frame)	133" ( Based on 40" truck frame)
Overall Height (Gate Raised)	157" ( Based on 40" truck frame)	157" ( Based on 40" truck frame)	160" ( Based on 40" truck frame)
Unload Speed/Time	Variable	Variable	Variable
Discharge Height	48"	48"	48"
Spread Coverage	12' to 30'	12' to 30'	12' to 30'
Recommended HP	300 (Minimum)	375 (Minimum)	450 (Minimum)
Beater Drive	PTO Driven Triple Gear Pump Driving 2 Hi Torque Motors.	PTO Driven Triple Gear Pump Driving 2 Hi Torque Motors.	PTO Driven Triple Hydrostat Pump Driving 2 Hi Torque Motors.
Belt Drive/Rear Gate	Uses Truck PTO Hydraulics. Belt Drive Speed Regulated by an Adjustable Flow Control Valve
Beaters	Two 35" Diameter High Speed Vertical Beaters with Spinners, and Double Flighting 300 RPMs @ 2000 RPMs		Two 42" Diameter High Speed Vertical Beaters with Spinners, and Double Flighting 265 RPMs @ 2000 RPMs
Belt and Chain Material	5⁄16" 350 psi PVC Belt and C102.5 Combination Chain For Belt and Retention Gate Drive System		5⁄16" 350 psi PVC Belt and WH124 H.D. Combination Chain For Belt and Retention Gate Drive System
Floor, Gate and Side Walls	High Density Polyethylene on Floor, Side Walls and End Gate

Dimensions and specifications are subject to change without notice.