|
Check these Rotomix Advantages!
- Three Models available Stationary, Trailer, or Portable.
- Hay Processor option allows inclusion of long-stem dry hay into ration to maximize benefits of TMR.
- Oil Bath encloses ALL drives for dependability and long life.
- Grease Bank allows easy access to main lubrication points.
- Optional Door Frame Spout Magnets trap foreign metal before it reaches the feed bunk.
- Digital Scale System provides the precise feed control demanded by today's producers.
- Unique Flared Side Wall ensures complete mixing of even the highest roughage rations.
- Vertically Adjustable Lower Side Auger for improved clean-out.
- Low Torque Design reduces horsepower requirements. Standard Stationary Model requires only 5 horsepower.
|
Trailer Model shown wiht optional Hay Processor
Hay processor recommended for mixing rations containing dry hay or haylage.
|
 |
84-8
Dimensions & Specifications
|
| |
Trailer |
Stationary |
Portable |
| Weight-Less Hay Processor |
3,110 lbs. |
2,850 lbs. |
2,900 lbs. |
| Weight-With Hay Processor |
3,330 lbs. |
3,070 lbs. |
3,120 lbs. |
| |
| Overal Length |
152" |
117" |
117" |
| Overall Width, Spout Up |
61" |
61" |
61" |
| Height-Less Hay Processor |
59" |
50" |
52" |
| Height-With Hay Processor |
76" |
67" |
69" |
| |
| Horsepower |
| Less Hay Processor |
24 HP Tractor |
5 HP Electric |
11 or 14 HP Gas |
| With Hay Processor |
24 HP Tractor |
7 1/2 HP Electric |
14 HP Gas |
| All Dimensions & Specifications are approximate and subject to change without notice. |
| All Models |
New Program
Ask about the new
Roto-Mix
Flexable Finance & Lease plans to any application.
Lease payments can accommodate any budget, any size operation.
Call today for a no-oblication consultation
620/225-1142
|
| Mixing Capacity |
80 Cubic Feet |
| Rotor Diameter |
36" |
| Inside Length |
96" |
| Inside Width |
54" |
| Inside Height |
37" |
| Tub Bottoms & Ends |
3/16" |
| Auger Bottom |
3/16" |
| Upper Sides |
12 Ga. |
| Auger Flighting |
12" OD Helicoid |
| Auger Tubes |
4" OD Heavy Wall |
| Rotor Tube |
4.5" OD Heavy Wall |
| Auger Shafts & Bearings |
2-7/16" & 2-15/16" |
| Rotor Shafts & Bearings |
2-15/16" |
| Auger Drive - Roller Chain |
#50 & #60 |
| Roter Driver - Roller Chain |
#60 Hi Test |
|
|
