Model 540-14 Commercial Series Feed Mixer

The 540-14 Horizontal Rotary Feed Mixer has a mixing capacity of 540 cu. ft. and can hold a maximum load with a heavy ration up to 15,240 lbs. It is available with a choice of several rotor styles to better mix your specific kind of rations. The patented Staggered Rotor GeneRation II option is ideal for feeding rations that require wet distillers grains. Three, Five and Six-Bar option rotary mixers allow more leaves and particle length during mixing with hay. This model is also available in Xtra Duty with new design features that add strength, are longer lasting and are even more maintenance free. These Roto-Mix Commercial Series Feed Mixers are ideal for medium-sized feeder or dairy operations.

Rotary Mixer Brochure PDF

GeneRation II Staggered Rotor

Forward Pitched Rotor and Staggered Rotor

The patented rotor lifts feed up to the side augers that move the feed from end-to-end for thorough mixing. The lifting action of the rotor eliminates wedging of the hay or long cut feeds under the lower auger. Patented tumbling design reduces mixing power requirements. See more about rotor options below.

Rotary Blend Rations

Our thorough mixing action eliminates dead spots and corner pile-up, giving you a consistent balance of nutrients from the first pound of feed to the last. Complete mixing of ingredients also reduces the ability of the cattle to sort and “nose out” ingredients.

Commercial Flighting

3/4", 5/8" and 1/2" flighting available for lower auger to extend life. Top augers available in 3/8" and 1/2" flighting.

Commercial Scale Check System

Load cell mounting comes standard with Roto-Mix ball and socket type tie bars to connect the mixer to the frame. This feature eliminates side and end movement on the load cells which allow for scale dependability and accuracy.

Easy Access Rear Door

Easy Access Rear Doors

The single lever latch makes inspection easy and desirable compared to other little latches or hardware.

Single Point Grease Bank

Single Point Grease Bank

Allows quick lubrication from a single point. Heavy-duty drive assembly runs in an enclosed oil bath.

Lower Center of Gravity

A lower center of gravity makes for a more stable unit when feeding and less shock load when cornering.

Flared Side

The flared side allows feed to tumble out of the rotor speeding up the mixing action and reducing the chance for feed to get trapped inside the rotor.

Full Scale Frame

Sturdy box frame construction with rectangular tubing for increased stability and weighing accuracy. Scale frame assembly allows scale frame to float independent of truck frame.

Flexibility

Feeds all types of grain, liquid feed, by-products, and forages. Ability to mix small and large batches with consistency, day after day, even with micro ingredients.

Commercial Duty Drive Train

Splined shafts eliminate shearing of keys and gaulding of shafts. Heavy-duty chains and bearings extend life and reduce downtime.

620-16 Hay Processor Illustration Commercial Feed Barn

Hay Processor

Adding hay to the ration is easy and convenient. Place the hay in the Hay Processor on the unit and let it do the work of separating the hay and distributing the long stemmed material into your mix. The result is hay with leaves intact and the stem not continually cut up or crushed.

Patented Double Flighted Top Auger

Helps to hold the hay in the processor to be separated and eliminates “hay balls” from slipping in-between the flights and into the mixing chamber.

620-16 Feed Mixer In Feed Lot
 

920-18 Stationary Commercial Feed Mixer3-Bar Rotor Illustration

Options

  • Door—Wide door openings allow for fast feed delivery with easy hydraulic control while mixer is running.
  • Spouts—Gravity discharge spouts have no moving parts. Wind exposure is reduced compared to other units throwing feed to the cattle.
  • Magnets—Trap foreign metal before it reaches the feed bunk.
  • Ladders to aid in inspection of mixing chamber.
  • Stainless steel liners for mixing chamber.
  • Rotor options of 3, 5, 6 or staggered to match the ration density and improve mixing speed and performance.

 

Which Style Rotor Should I Choose?

GeneRation II Illustration

GeneRation II Staggered Rotor option is ideal for feeding rations that require wet distillers grains. Improved lifting and tumbling action, less revolutions, faster mix saves time and fuel and lowers maintenance costs.

5-Bar Option Illustration

5-Bar option allows for more leaves and more flakes. The patented rotor lifts feed up to the side augers that move feed from end to end for thorough mixing. This option is preferred in beef operations not using wet distillers grains.

3-Bar Option Illustration

3-Bar option Rotary Mixer allows more leaves and particle length during mixing with hay— a preference when feeding in dairy operations.

 

Specifications

Illustration Specifications Drawings

Ref.Dimensions, Weight, Capacity540-14
  Weight–Stationary–Less Motor, lb. (kg) 14,750 (6690.4)
  Weight–Truck Unit–Installed, lb. (kg) 15,250 (6917.2)
  Weight–Trailer with Tires, lb. (kg) 16,990 (7706.5)
  Weight–Hay Processor, lb. (kg) 750 (340.2)
  Rotor Diameter, in. (cm) 72½ (184)
  Inside Length, in. (cm) 168 (427)
  Inside Width, in. (cm) 103¼ (262)
A Overall Length–Mixer Only, in. (cm) 194 (493)
G Overall Width–Mixer Only, in. (cm) 115 (292)
F Overall Width–Spout Up, in. (cm) 112½ (286)
E Overall Length including Trailer, in. (cm) 253¾ (645)
E Overall Length–Stationary Drive, in. (cm) 206½ (525)
H Height of Mixer–Base to Top, in. (cm) 75 (191)
  Height of Mixer–Oil Bath Drive, in. (cm) 82 (208)
H Height on Trailer–Standard Tires, in. (cm) ‡ 110½ (281)
H Height on 36/40" Truck Frame, in. (cm) 116 (295) 36 (91.5)
H Height on Stationary Scale Frame, in. (cm) 85½ (217)
  Spout Width–Truck and Trailer, in. (cm) 48½ (123)
  Discharge Frame Width–Stationary, in. (cm) † 46½ (118)
D Truck Cab to Axle, in. (cm) 120 (305)
  Capacity, Struct Level, cu. ft. (m3) 586 (16.59)
  Mixing Capacity, cu. ft. (m3) 540 (15.29)
  Mixing Capacity, bushels (liters) 432 (15,223)
  Maximum Heavy Ration, lb. (kg) 15,240 (15,240)
  Tub Bottom, in. (cm) * 3/8 (0.9525)
  Auger Bottom, in. (cm) * 3/8 (0.9525)
  Ends, in. (cm) ¼ (0.625)
  Upper Sides 7 Ga.(0.4547)
  Top Auger Flight OD, in. (cm) * 3/8 x 24 (0.952 x 61)
  Lower Auger Flight OD, in. (cm) * ¾ & ½ x 24 (1.90 & 1.27 x 61)
  Auger Drive—Roller Chain * #80,100,120
  Rotor Drive—Roller Chain #140
  Top Auger Drive Shaft, in. (cm) 3½ (8.89)
  Lower Auger Drive Shaft, in. (cm) 4 (10)
  Rotor Drive Shaft, in. (cm) 3½ (8.89)
  Stationary—Electric (Hay Processor) Horsepower (kilowatts) 50 (36.77)
  Stationary—Electric (Standard) Horsepower (kilowatts) 40 (29.42)
  Recommended PTO Horsepower (kilowatts) 100 (74.57)

* Other Options Available
† Special door sizes and locations available for all stationary mixers
‡ Tire sizes may vary height.
All dimensions and specifications are approximate and subject to change without notice.
Weights listed with most common option packages excluding hay processors and folding conveyors.